Free C2C graph generator: turn a photo into a corner-to-corner pattern
A C2C graph is just a grid where every square is one tile. The hard part is choosing the grid size and the colors, then counting the diagonals. Here is how to do it well, and how LoopChart does the counting for you.
What a C2C graph generator actually does
Corner-to-corner (C2C) crochet builds a piece out of small tiles worked on the diagonal. Each tile is usually a chain of 3 plus 3 double crochet (US terms), or half double crochet if you want a smaller, denser tile. Because every tile is roughly square, any picture can be turned into a C2C pattern by laying a grid over it and giving every grid square one yarn color.
A generator does three jobs:
- Resizes the picture to the number of tiles you want across and down, for example 60 × 60.
- Reduces the colors to the handful of yarns you will actually buy, usually 3 to 8.
- Writes the diagonals out as color counts, so you are not counting squares on a screen while holding a hook.
The third job is the one most free tools skip. A graph alone is fine for a 20 × 20 coaster. For a blanket with 100 diagonals, written counts like Row 7 ↗ (inc): 2 A, 3 B, 2 A save hours and a lot of frogging.
Step by step: photo to C2C pattern
1. Pick a picture that will survive being shrunk
At 60 tiles across, a whole face is about 60 squares wide. Fine detail like eyelashes, small text or busy backgrounds disappears. The pictures that work best have a clear subject, a plain background, and big areas of color. Crop tight before you start. Logos, pets on a plain sofa, simple illustrations and pixel art all work well.
2. Choose the size in tiles
Decide how big the finished piece should be, then divide by the size of one tile. A worsted-weight double crochet tile is often about 2.5 cm (1 in) on each side, but measure a small swatch of your own: 10 tiles across tells you more than any chart. A 50 × 60 in throw is then roughly 50 × 60 tiles. Keep the photo's proportions so the picture is not stretched.
3. Choose the number of colors
Each color is another bobbin to manage. Four to six colors is plenty for most pictures, and two or three can look striking. LoopChart picks a starting palette from the photo automatically; you can then lower or raise the count, merge two colors that look the same in yarn, or match the palette to a popular yarn brand so you know which shades to buy. Yarn colors on screen are approximations, so check them against real skeins or shade cards.
4. Clean up the chart
Photos produce stray single tiles of a color in the middle of another color. In C2C each of those means joining a new color for one tile. The clean up stray stitches button removes those lonely tiles, and you can paint, fill or pick colors with the eyedropper to fix anything else. Undo and redo are always there.
5. Pick your start corner and read the rows
C2C starts with one tile in a corner and grows one diagonal at a time. Right-handed crocheters often start in the bottom-right corner, left-handed crocheters often in the bottom-left, but patterns differ. LoopChart lets you choose the corner, including a left-handed option, and shows an arrow on every written row so you always know which way that diagonal runs.
A tiny example
Here is a 7 × 6 tile heart in two colors, A (background) and B (heart). Row numbers on the left count from the bottom.
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
|---|---|---|---|---|---|---|---|
| 6 | A | B | B | A | B | B | A |
| 5 | B | B | B | B | B | B | B |
| 4 | B | B | B | B | B | B | B |
| 3 | A | B | B | B | B | B | A |
| 2 | A | A | B | B | B | A | A |
| 1 | A | A | A | B | A | A | A |
It has 7 + 6 − 1 = 12 diagonals. Starting from the bottom-right corner, the written pattern looks like this:
Row 1 ↗ (inc): 1 A Row 2 ↙ (inc): 2 A Row 3 ↗ (inc): 3 A Row 4 ↙ (inc): 4 B Row 5 ↗ (inc): 1 A, 4 B Row 6 ↙ (inc): 1 A, 4 B, 1 A Row 7 ↗ (inc one side, dec the other): 2 A, 4 B Row 8 ↙ (dec): 4 B, 1 A Row 9 ↗ (dec): 1 A, 2 B, 1 A Row 10 ↙ (dec): 3 B Row 11 ↗ (dec): 2 B Row 12 ↙ (dec): 1 A
Rows 1 to 6 grow by one tile each (increase). Because the chart is one tile wider than it is tall, row 7 stays the same length: you increase on one edge and decrease on the other. Rows 8 to 12 shrink (decrease). The full method is in how to read a C2C graph.
What you get for free, and what Pro adds
The free version is a complete tool, not a demo. You can make a chart up to 60 × 60 tiles with up to 6 colors, see the written row-by-row instructions on screen, get a yarn estimate per color, and export a PNG of the chart with a small watermark.
Pro is $4 a month or $24 once for lifetime access. It removes the size and color limits, removes the watermark, and adds a PDF with the chart, the written rows, a color legend and the yarn estimate. It also saves projects in your browser and adds a progress tracker where you tap each row as you finish it. There is no account: Pro is unlocked with a license key that arrives by email.
Before you start crocheting
- Wind a small ball or bobbin for each color patch rather than carrying yarn across long stretches. C2C is usually worked with separate bobbins, not carried strands.
- Mark your place. Reading at arm's length is easier when you highlight the current row; the Pro progress tracker does this for you.
- Check your yarn before buying everything. The estimate is calculated from tile counts and is an estimate; see how much yarn a C2C blanket needs.
- For help picking a palette, see choosing colors for a photo pattern.
Questions people ask
Is the C2C graph generator really free?
Yes. Charts up to 60 × 60 tiles with up to 6 colors are free, including the written row counts on screen, the yarn estimate and a PNG export with a small watermark. There is no signup. Pro ($4 a month or $24 lifetime) lifts the limits and adds PDF export, saved projects and a progress tracker.
Is my photo uploaded anywhere?
No. LoopChart runs in your browser. The picture is processed on your device and is never sent to a server.
How many tiles do I need for a blanket?
Divide the finished size by the size of one of your tiles. With a worsted double crochet tile of about 2.5 cm (1 in), a 50 × 60 in throw is roughly 50 × 60 tiles. Make a small swatch first, because tile size varies a lot with yarn, hook and tension.
Can I use the chart for tapestry crochet or knitting?
Yes. Switch the technique to tapestry or graphgan for row-by-row charts, or to knitting, where the chart uses your gauge so stitches are not drawn as squares.
Does it work on a phone?
Yes. The chart maker works in mobile browsers, so you can pick a photo from your camera roll and read the rows from the same phone.